Abrasive And Corrosion Resistance Solid Carbide Rods With Inner Straight Hole
Production Features
1. we are using 100% WC and the raw matearils of CO.
2. High hardness HRA89-93 ,good bending strength TRS 2800-4200.N/mm2
3. Long probation,stamping.
4. Has good wear resitance.
5. Professional manufacturer for more than 10years experience.
6. ISQ 9001-2015 Quality Control System.
7. With the HIP sintered technology,the structure of tungsten carbide is more uniform,more dense,the TRS can be raised more than 20%
Application of tungsten carbide rod
1. Used for making various kinds of carbide solid tools and cutting tools, such as drills, end mills, thread taps, rotating file,etc. A good material for general-purpose. Suitable for machining carbon steel, cast irons, stainless steel, heat-resistance steel, nickel based alloys and titanium alloys.
2. Wear Parts
3. Wire Guiding
4. Stamping/heading dies
Detail Specification:
| Material: | Tungsten Carbide |
| Size: | Dia12*Dia8*100mm, Dia16*Dia6*500mm, Dia25*Dia12*400mm Various size |
| Size Tolerance | Blank (+0.2/0) or as customer's request |
| Grade: | YG8/YG10/YL10.2 |
| Grain Size: | 0.8-1.2μm |
| Application: | wear parts, wire guide |
| Properties: | Long life,good wear resistance and high hardness. |
| Certificate: | ISO9001:2015 |
| Cpmposition: | WC+Co/WC+Ni |
Some Size list
| Size range(DiaXL mm) | Blank Tolerance |
| OD(mm) | ID ( mm) | L(mm) |
| OD2*ID0.2/0.25/0.3/0.4 | +0/+0.3 | +-0.05 | 0/+2 |
| OD3*ID0.15/0.2/0.3/0.4/0.5/0.6... | +0/+0.3 | +-0.05 | 0/+2 |
| OD4*ID0.15/0.2/0.3/0.4/0.5/0.6... | +0.3/+0.6 | +-0.05 | 0/+2 |
| OD6*ID0.2/0.3/0.4/0.5/0.6./1.0.. | +0.3/+0.4 | +-0.05 | 0/+2 |
| OD7*ID0.2/0.3/0.4/0.5/0.6./1.0..... | +0.3/+0.6 | +-0.05 | 0/+2 |
| OD8*ID0.2/0.3/0.4/0.5/0.6./1.0.... | +0.3/+0.6 | +-0.05 | 0/+2 |
| OD9*ID/0.2/0.3/0.4/0.5/0.6./1.0/1.2.. | +0.3/+0.6 | +-0.05 | 0/+2 |
| OD10*ID/0.2/0.3/0.4/0.5/0.6./1.0.... | +0.3/+0.6 | +-0.05 | 0/+2 |
| OD12*ID0.5/0.6/.........8/10... | +0/+0.5 | +-0.05/+-0.3 | 0/+2 |
| OD14*ID0.5/0.6/.........8/10... | +0/+0.5 | +-0.05/+-0.3 | 0/+2 |
| OD25*ID6/8/10/12. | +0/+0.5 | +-0.05/+-0.3 | 0/+2 |
| For more size, please kindly contact us. we are able to custom-made according to drawings. |
Carbide Rods Grades for Cutting Tools
| Grade | ISO Grade | WC% | Co% | Grain Size μm | Hardness (HRA) | Density g/cm3 | T.R.S. N/mm2 | Application |
| YG6X | K10 | 94 | 6 | 0.6-0.8 | 14.9 | 92 | 2000 | Suitable for processing Chilled cast iron, heat-resistant alloy steel, and fine process of common cast iron |
| YL10.2 | K25-K35 | 90 | 10 | 0.6-0.8 | 14.5 | 92.5 | 3800 | Wear resistance and strength comparatively higher,suitable for PCB micro drills,for making drills,end mill,reamer,taps,burrs etc. |
| ZF06X | | 92 | Co-6% TaC-2% | 0.6 | 14.8 | 91 | 1300 | suitabble for cutting tools |
Carbide Rods Grades for Moulds/Dies
| Grade | ISO Grade | WC% | Co% | Grain Size μm | Hardness (HRA) | Density g/cm3 | T.R.S. N/mm2 | Application |
| YG8 | K30 | 92 | 8 | 1.2 | 14.6 | 89 | 2320 | Suitable for the roughening of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
| YG6 | K20 | 94 | 6 | 1.2 | 14.9 | 89.5 | 2150 | Good Wear resistance, used for hard wood,processing original wood,aluminum section bar,brass rod and cast iron. |
| YG15 | | 85 | 15 | 1.6 | 14.1 | 86.5 | 2400 | Medium grain, for mining tools, cold heading and punching dies |
| YG20 | | 80 | 20 | 1.6 | 13.7 | 85 | 2500 | suitable for stamping dies such as screw, watch parts |
| YG20C | | 80 | 20 | 1.8-2 | 13.6 | 82 | 2200 | Suitable for colding heading dies, stamping dies such as shaft ,standard parts |
Cutting steel class grade
| Grade | ISO Grade | Density g/cm3 | Hardness HRA | T.R.S N/mm2 | Application |
| YT5 | P30 | 11.50-13.20 | 90.0 | 1750 | Suitable for heavy duty cutting of steel and cast steel and for a low-speed and medium-speed and a big feed-rate roughing operation under unfavorable machining conditions |
| YT14 | P20 | 11.20-11.80 | 91.0 | 1550 | Suitable for semi-finishing and finishing machining of steel and cast steel, using a medium feed-rate |
| YT15 | P10 | 11.10-11.60 | 91.5 | 1500 | Suitable for semi-finishing and finishing machining of steel and cast steel and a medium feed-rate and a rather high cutting speed is to be recommended |
| YC40 | P40 | 13.00-13.40 | 89.5 | 1860 | Suitable for heavy duty cutting of steel and cast steel with a possible big feed-rate and for face milling as well. |
| YW1 | M10 | 12.85-13.40 | 92.0 | 1380 | Suitable for semi-finishing and finishing of stainless and ordinary alloyed steel |
| YW2 | M20 | 12.65-13.35 | 91.0 | 1680 | Suitable for semi-finishing and finishing of stainless and low alloyed steel, mainly used for machining of trains' wheel hubs |
| YW3 | M10 | 12.85-13.10 | 92 | 1420 | It is suitable for semi-finishing and finishing of stainless and ordinary alloyed steel |
We guarantee:
* We are real factory in Zhuzhou
* Manufactured with100% tungsten carbide raw material
* Comply with ISO 9001:2015 Certification
* Rich experience of over 10 years
* Advanced technology , automatic pressing , HIP sintering
* Full ability to accept OEM & ODM orders
* Strict inspection for quality of raw material and finished products
For more detail size,pls email us,thanks
Product Tags:
|
|
Solid Carbide Round Bar Abrasion And Corrosion Resistant With Inner Straight Hole Images
|
